Limestone is mainly quarried for the construction of buildings, roadbeds and landscape construction. Limestone is widely used in cement production for the construction of architecture and landmarks around the world. It is widely distributed and quite easy to be processed into different sizes for block making as well as carving works.
1.Limestone Crushing Process（PEW series jaw crusher):
Rising around) collectively referred to as the motor drive triangle belt to transmit the power to the belt pulley, a belt wheel drives the eccentric shaft to make the movable jaw jaw is arranged on the surface of the jaw, jaw plate movable jaw plate at the upper part of the eccentric shaft motion caused by the moving jaw movement, when moving jaw elbow plate and the movable jaw clamp angle becomes larger, thus pushing the movable jaw plate to the fixed jaw plate close, and at the same time the material is crushed or split pieces (shear broken), to broken. When the movable jaw down, elbow plate and the movable jaw angle becomes small, the movable jaw plate on the pull rod, a spring, leaves the fixed jaw plate, this time has been broken material from the crushing cavity mouth eduction. With the continuous rotation of the motor and the crushing of motor jaw for periodic movement of crushing and waste materials, to achieve mass production.
2.Limestone milling Process(hammer mill):
Material into the hammer mill, suffering the impact of high-speed rotary hammer crushing, crushing the material, from the hammer break hammer mill to obtain kinetic energy, from high speed toward the frame body plate, screen, at the same time material collide, had been repeatedly broken, less than sieve. The gap between the material, discharged from the gap, individual larger material, in the sieve bar again by the impact of the hammer, grinding, extrusion and broken material is hammer crusher hammer from the gap in the extrusion. To obtain the required size of the product.
Previous: Sand maker philippines